End-user licence agreement
Last updated: 19 November 2026
This end-user licence agreement ("EULA") is an agreement between you and Cauldron Development Oy, a company in Finland (Business ID 3264537-2) ("we"), about your use of CAMotics Online at camotics.org: the web application, the service behind it, and the programs, toolpaths, simulations and other results that it makes. It is part of our Terms of service. You must accept it before you use CAMotics Online.
In short
- CNC machines are dangerous. They can cause serious injury, death, fire and damage to property.
- **You alone are responsible for every program that you run on a machine**, and for checking it first: dry run, air cut, setup, workholding, tools, offsets and feeds.
- Our results can be wrong. Simulations, estimates, crash and collision checks, programs made or changed by our AI assistant and programs remixed from other users can be wrong or incomplete. A program that the software says is checked or has no errors can still crash, break a tool or hurt someone.
- We give the software "as is", and limit our liability as far as the law allows. We do not limit it where the law does not allow it, for example for death or personal injury caused by our negligence.
This summary is not the full agreement. Please read the sections below.
1. Licence
While you comply with this EULA and the Terms of service, we give you a personal, non-exclusive, non-transferable, revocable licence to use CAMotics Online, for your own projects, for personal or business use. The service stays ours; you get only the rights that this EULA gives you.
You may download, keep and use the G-code, toolpaths, models and other results that CAMotics Online makes from your projects, also after this EULA ends. They are yours as far as they are your content (see "Your content" in the Terms of service).
You must not copy, sell or rent the web application, or get around its limits, except as the law or an open-source licence (section 10) allows.
2. Safety warning
**Computer numerical control (CNC) machines, such as mills, routers, lathes, lasers and plasma cutters, are dangerous.** A wrong program, a wrong setup or a fault in a machine can make it move in a way that you do not expect, at full speed and with full force. This can:
- cause serious injury or death, for example from a moving spindle, tool or axis, from parts or broken tools thrown from the machine, or from dust, fumes or noise;
- start a fire, for example in chips, dust or the workpiece;
- damage the machine, tools, fixtures, workpiece and other property.
Use a machine only if you are trained to use it safely, follow its maker's instructions and the safety rules where you work, and use the right protective equipment. Never leave a running machine alone. Know where the emergency stop is.
3. You are responsible for what you run
**You, the operator, are solely responsible for every program that you run on a machine and for everything that the machine does when it runs it.** This is so whoever or whatever made the program: you, CAMotics Online, our AI assistant, another user whose project you remixed, or any other source.
Before you run a program, you must check it on your own machine, for example:
- read the program and check that its units, coordinates, work offsets, tool numbers, tool lengths and diameters, spindle speeds and feed rates are right for your machine, tools and material;
- check the setup: the stock, its size and position, the workholding and clamps, the tools and tool holders, and the machine's zero and limits;
- run the program first with no tool or no stock, or above the stock ("air cut" or "dry run"), with the feed and rapid overrides turned down, and watch it;
- be ready to stop the machine at once.
You are also responsible for the safe operation, maintenance and guarding of your machine, for the people near it, and for following the laws and safety rules that apply to you.
4. What our results are, and what they are not
CAMotics Online makes models of what a machine does. They are not the machine. Its results can be wrong or incomplete, for example because of a fault in our software, a setting or tool that does not match your machine, a G-code dialect or machine behavior that we do not model, or a limit of the method that we use. This applies to all of it, including:
- simulations of the cut, the shape of the part, the tool path and the machine's motion;
- estimates, for example of cycle time, material removal or use of your allowance;
- automated checks, for example crash detection, collision checks, checks of rapids into the stock, limits, tools and setup;
- programs and toolpaths that CAMotics Online makes, for example from CAM operations or TPL programs, and the G-code that it exports;
- programs written or changed by our AI assistant (see section 5);
- programs in projects that other users share, and those that you remix or copy (see section 6).
**When CAMotics Online says that a program was checked, that a check passed, that it found no crashes, collisions or errors, or anything similar, this does not mean that the program is correct or safe to run.** A check finds only some kinds of problems, only in what it models, and can miss them. It does not replace your own checks in section 3.
We are not responsible for the results of running any program on a machine, except as section 8 says.
5. The AI assistant
CAMotics Online may offer an AI assistant that writes or changes programs, CAM operations and project settings for you. AI makes mistakes that look right. A program that the assistant wrote or changed can have wrong coordinates, depths, feeds, speeds, tools or units, or moves that crash. Review every change that it makes, and treat its programs as you would a program from a stranger: check them fully, as section 3 says, before you run them. Its answers and explanations can also be wrong. Sections 3, 4, 7 and 8 apply in full to everything that it makes.
6. Other users' projects
Projects that other users share, and projects that you remix from them, are those users' content, not ours. We do not check them. They can be made for another machine, tool, material or unit, or be wrong. Check them as you would your own (section 3). When you share a project, others may run it on their machines, and this EULA applies to them as it does to you.
7. No warranty
To the extent that the law permits, CAMotics Online and its results are provided "as is" and "as available", without any warranty, express or implied, including any warranty of merchantability, fitness for a particular purpose, accuracy or non-infringement, and without any promise that they are free of errors or always available.
If you are a consumer, you keep the rights that the law gives you, for example when a digital service does not conform to the contract, and nothing in this EULA limits them.
8. Limitation of liability
To the extent that the law permits:
- we are not liable for any indirect or consequential loss, or for lost profits, production, data or time;
- we are not liable for damage to machines, tools, fixtures, workpieces or material, or for the cost of repairing or replacing them, that comes from running a program or from relying on a simulation, estimate, check or other result of CAMotics Online;
- our total liability for all claims about CAMotics Online is limited to the amount that you paid us in the 12 months before the claim, or 50 euros, whichever is more.
**Nothing in this EULA or the Terms of service limits or excludes our liability** for death or personal injury caused by our negligence, for damage that we cause intentionally or by gross negligence, for fraud, or any other liability that the law does not allow us to limit or exclude. If you are a consumer, nothing here limits the rights that you have under the mandatory consumer law of the country where you live.
9. Indemnity
If you use CAMotics Online for a business, you agree to compensate us for the claims of others against us, and the reasonable costs of them, that arise from the programs that you run on a machine, from your breach of this EULA or the Terms of service, or from content that you share, except as far as we caused them.
If you are a consumer, this section applies only to the extent that the mandatory consumer law of the country where you live allows it, and only for loss that you caused intentionally or by negligence.
10. Open-source software
CAMotics Online is built on CAMotics and other open-source software. The CAMotics desktop application, its simulation engine and those other components are licensed under their own licences, for example the GNU General Public License (GPL). Those licences, not this EULA, govern your rights in those components, and nothing in this EULA limits the rights that they give you. Their source code is available from camotics.org and the projects' own sites.
11. Ending
This EULA lasts while you use CAMotics Online. It ends with the Terms of service, for example when you delete your account. Sections 3 to 9 and 12 stay in force after it ends, for programs and results that you got while it applied.
12. Law
This EULA is governed by the law of Finland, as the Terms of service say. If you are a consumer in the EU, you keep the protection of the mandatory consumer law of the country where you live, and you can also go to the courts of that country.
13. Changes
We can change this EULA. We post the new text here and change the date. When a change is important, we ask you to accept the new EULA before you use CAMotics Online again.
Contact: support@camotics.org.